Premier Mounts Projector Accessories PDS 017 User Manual

PDS-017 Projector Bracket  
PDS-017 Projector Bracket Installation Instructions  
M4 x 10mm Phillips  
Head Screws  
(Qty 3)  
PDS-017 Bracket  
(Qty 1)  
M4 x 10mm  
Security Head  
Screws (Qty 3)  
Premier Mounts  
3130 E. Miraloma Ave.  
Anaheim, CA 92806  
Phone: (800) 368-9700 Fax: (800) 832-4888  
1. Using a screwdriver, secure the PDS-017 mounting bracket using four (4)  
M4 x 10mm Phillips Head screws. Do not over tighten these screws.  
Overtightening the screws may result in damaging the threaded inserts on  
the projector.  
NOTE: Please refer to the PDS Base Box Installation Instructions to attach  
the PDS Base Box to the PDS-017 mounting bracket.  
1. Invert the projector and place it on a soft and flat surface. Remove any foot  
levelers that might possibly prevent the correct installation of the bracket.  
2. Locate the four mounting points located on the bottom of the projector.  
3. Line up the mounting points on the projector with the mounting holes on  
the PDS-017 mounting bracket.  
NOTE: The projector (shown above) is for illustration purposes only.  
Installation Instructions  
Page 1  
IN-PDS017.R0  
 

Philips Home Safety Product SBCFL146 User Manual
Philips Indoor Furnishings TL D Snow White User Manual
Philips Switch SWV3573 User Manual
Philips Work Light T8 U Bent User Manual
Pioneer DVD Recorder T502202 User Manual
Planet Technology Switch FSD 805 User Manual
Polycom Webcam FX User Manual
Pride Mobility Mobility Aid I NFMANU3363 User Manual
Prince Castle Toaster TX 208 User Manual
ProForm Home Gym PCEL87075 User Manual